Fig. 1 above: Scan from the technical manual. Some of the other graphics
more fully refer to the device as a General Electric Army Model C204
Gravity Distortion Time Displacement Unit.
Fig. 2 above: Scan from the technical manual. Looks like it might be a
scan from a photocopy of a printed photograph, which would reproduce
pretty terribly like this.
Fig. 3 above: Scan from the technical manual. This should be compared with
Fig. 4 below, which is presumably a scan from a different page,
which has some slight differences.
They each show a diagram of the
field shapes and time vectors produced by the unit during operation.
Fig. 4 above: Scan from the technical manual. Notice the three event
horizon labels at the bottom are mislabeled 11, 12, and 13, where
in the page above they are labeled 10, 11, 12 and correspond to the
Note that this graphic includes the dimensions of 6
(vertical safe distance 6 meters), 7 (mass offset 5 meters), 8 (rear
mass distribution 8 meters), and 9 (forward mass distribution 11
Interpretation of Fig. 4 legend above
1 Dual singularities in kerr field
2 Output of negative time field
3 Output of null time field
4 Output of positive time field
5 X-ray venting cone
6 Vertical safe distance (6 meters)
7 Mass offset (5 meters)
8 Rear mass dist. (8 meters)
9 Forward mass dist. (11 meters)
10 Negative time event horizon
11 Null time event horizon
12 Positive time event horizon
Fig. 5 above: Scan from the technical manual. Unfortunately some of the
legend is unreadable. Below the graphic I have recreated what I
believe the text to read.
Interpretation of Fig. 5 legend above
1 Singularity drive housing
2 Singularity magnetic field coil
3 Magnetic field generator/regulator
4 Electron mass injector manifold
5 Electron regulator
6 Electron (generator?)
7 Singularity (status sensor?)
8 Singularity cooling housing
9 Singularity cooling pump
10 Singularity cooling supply
11 Gravity sensor unit
12 Battery supply
posted 01-29-2001 01:37 PM
Registered: Jan 2001
Although the documents posted were printed from a computer printer,
is it really that hard to believe that manual typing is just a bit
more common in thirty years? After the war, many things like manual
printing machines, bicycles, sailboats and hand tools were valued a
great deal. I have noticed more people in California are installing
wood burning stoves.
I realize my claims are a bit ridiculous but my intent is not really
to be believed. However, if I had an opportunity to talk to a time
traveler, I might ask questions like:
How exactly does the
singularity sensor measure the expansion of the inner event horizon
or why does the reality of multiple worlds support the religious
dogma that there are no good or bad people just good and bad
decisions or what were the political motivations that changed the
Fig. 6 above: Scan from the technical manual. Shows layout of major
external components and defines the Main and Steering singularities.
Notice they are located fore and aft of the time distortion field,
which direction is delineated by the prominent black and yellow tape
(here black and white).
posted 14 October 2000
TimeTravel_0 : As it turns out...
TimeTravel_0 : If you encounter a black hole that is spinning and
has an electrified field, you will not be killed passing through its
massive gravitational fields.
TimeTravel_0 : regretting asking yet>
Yareisa : no
TimeTravel_0 : Ok
wyrmkin_37 : no
Yareisa : I'm hooked
TimeTravel_0 : In about a year...
G° : is this the omeg point theory?
G° : omega?
TimeTravel_0 : CERN will discover some very odd things as a result
of their high energy experiments.
TimeTravel_0 : in about a year.
TimeTravel_0 : from your point of view.
wyrmkin_37 : cern?
TimeTravel_0 : in Geneva.
Yareisa : particle accelerator
wyrmkin_37 : oh
TimeTravel_0 : They will
accidentally create microsingularities.
G° : makes things go round and hit each other...
TimeTravel_0 : Which will evaporate very quickly.
wyrmkin_37 : one in texas?
TimeTravel_0 : and create a massive
amount of X-ray and Gamma rays.
TimeTravel_0 : It will puzzle them for a while.
TimeTravel_0 : Until they figure out how to add and
and capture these strange odd and massive particles in a magnetic
wyrmkin_37 : they shoot electrons at the speed of light.......see
what they bust up into
TimeTravel_0 : Yes.
G° : still with you...
wyrmkin_37 : quarks
TimeTravel_0 : If you bombard a singularity with electrons...
TimeTravel_0 : you can alter the size of its event horizon.
TimeTravel_0 : and thus its gravitational field.
TimeTravel_0 : By overlapping these
fields from two singularities...
TimeTravel_0 : you can travel forward and backward through time.
TimeTravel_0 : Its actually quite simple.
I follow now
TimeTravel_0 : That's not the hard part.
G° : didn't tipler say there was no event horizon?
TimeTravel_0 : No... he said it was possible to approach a massive
gravitational field from certain angles and not get squished.
G° : oh, sorry
wyrmkin_37 : lol
TimeTravel_0 : Actually...I'm not really a
G° : but you know all about this stuff... is that why you were
TimeTravel_0 : I specialize in 20th century history and my
grandfather builds computers.
wyrmkin_37 : what base?
TimeTravel_0 : Hmmm....you drive a car and know how to change the
oil don't you?
TimeTravel_0 : I am based in Tampa Fl.
G° : actually, only just.. LOL
wyrmkin_37 : chas, afb
TimeTravel_0 : McDill
wyrmkin_37 : kewl
G° : sorry?
G° : in english?
wyrmkin_37 : zoomies
Yareisa : that's english?!
G° : you airforce wyrm?
wyrmkin_37 : yes
G° : your not working on a time machine are you?
G° : come here for guidance...
wyrmkin_37 : no just came in for chat
TimeTravel_0 : Altering gravity is not the hard part.
G° : LOL
Yareisa : go on...
TimeTravel_0 : Detecting gravity is the hard part.
TimeTravel_0 : I will tell you a little story.
TimeTravel_0 : When time travel was invented.
TimeTravel_0 : They built prototypes that would go back in time for
a split second and then return.
TimeTravel_0 : They had sensors and cameras on them.
TimeTravel_0 : ...and they never returned.
G° : and forwards as well? how about a single jump forwards?
TimeTravel_0 : It was later discovered that the machines were ending
up about 15 miles away and 3000 feet in the air.
TimeTravel_0 : feet
G° : doh!
TimeTravel_0 : The Earth was rotating away from them.
wyrmkin_37 : synchronization please
TimeTravel_0 : A system had to be invented that would "hold" the
machine to the Earth.
TimeTravel_0 : Its called VGL.
TimeTravel_0 : Its based on very
sensitive clocks and gravity
TimeTravel_0 : It stops the time distortion machine if radical
changes in gravity are detected.
wyrmkin_37 : mechanical or electronic clocks
TimeTravel_0 : You wouldn't want to end up inside a mountain or
under water...would you?
TimeTravel_0 : Cesium.
wyrmkin_37 : oh
G° : isn't all this classified? surely your
supposed to keep it
secret whilst in the past?
TimeTravel_0 : LOL!!!
TimeTravel_0 : I know you think
I'm nuts...come on.
TimeTravel_0 : Who would believe me?
G° : just asking?
TimeTravel_0 : It my best defense.
wyrmkin_37 : isn't celsium a higher class of quartz?
G° : but we don't have long to find out if you are or not
TimeTravel_0 : Besides...do you know how big a hole 2
make when their magnetic filed collapses?
G° : won't be long before CERN (?) make the discovery
TimeTravel_0 : That's right.
G° : no
TimeTravel_0 : Welll....either do I. But I
don't want to know.
posted 01-29-2001 01:37 PM
Registered: Jan 2001
By using two micro-singularities in close proximity to each other, it
is possible to create, manipulate and alter the Kerr fields to
create a Tipler gravity sinusoid.
This field can be adjusted,
rotated and moved in order to simulate the movement of mass through
a donut-shaped singularity and into an alternate world line. Thus,
safe time travel.
Fig. 7 above: Detailed device schematic, presumably another scan from the
technical manual but that is uncertain. Unfortunately the legend is
missing for all the numbered labels, or we could go a lot farther in
analyzing the circuitry.
Fig. 8 above: Appears to be a scan of a black and white photo of the
device. Not from http://www.anomalies.net/time_traveler/john.html
however, but from Pamela.
Fig. 9 above: Photo of the unit in the car (Corvette). The device appears
to have been moved to the passenger's side. If it weighs 500 pounds
as John said, moving it would be some feat.
Fig. 10 above: Bent laser light.
Description purportedly from John.
This is a picture taken in the fall of 2035 during my training. It
shows my instructor beaming a handheld laser outside the vehicle
during operation. The beam is being bent by the gravitational field
produced outside the vehicle by the distortion unit. The beam is
visible through smoke that is coming from his cigar.
Fig. 11 above: Photo of the unit in a vehicle. This appears to not be a
Corvette, John mentioned somewhere that he swapped the Corvette for
a truck. That looks like a shotgun in the front center.
Fig. 12 above: A second photo of the unit in the truck. Paint colors
match, the padded cushion in the foreground appears to be the same
as in Fig. 11, and there is the same white box to the left of the
unit in both photos.
Fig. 13 above: Third photo of the unit in the truck. The several objects
in the foreground appear to have not been moved, but the light is
different as if this photo were taken at a different time of day
than Fig 12. There is a red glow reflecting off the instruction
label which could possibly be an indicator lamp. Could the unit be
Possibly it's in some kind of testing or maintenance mode
or maybe it's reflecting light from outside the vehicle. The glow
appears to be coming from a button labelled 'emergency disconnect'
(#5) in Fig. 6. But it could also be coming from the 'emergency view
screen' (#4) shown in Fig. 6 if that is perhaps a red LED display.
Fig. 14 above: John's unit insignia. Supposedly the design is based on the
field patterns of the time distortion device, reminiscent of Figs 3
and 4 above. It's probably unwise to try to infer too much from it
since it's just a logo design.
Unknown original URL, still searching for original text, this comes
from a compilation that was downloaded from
which was posted there by Rick Donaldson, an Anomalies Network
Moderator who provided a link to it at
http://www.anomalies.net/cgi-bin/bbs/ultimatebb.cgi?ubb=get_topic&f=9&t=000019&p= on September 25, 2001 14:28
Member posted 05 November 2000 03:29
Questions for timetravel_0 with permission to post.
by the way can you tell me what it feels like to time travel? when
you are in the process of doing it what does it feel like and what
do you see and hear. you made mention that you had to get use to the
fields. Do you see a bright flash of light?
Interesting first question.
The unit has a ramp up time after the
destination coordinates are fed into the computers. An audible alarm
and a small light start a short countdown at which point you should
be secured in a seat. The gravity field generated by the unit
overtakes you very quickly. You feel a tug toward the unit similar
to rising quickly in an elevator and it continues to rise based on
the power setting the unit is working under. At 100% power, the
constant pull of gravity can be as high as 2 Gs or more depending on
how close you are to the unit. There are no serious side effects but
I try to avoid eating before a flight.
No bright flash of light is seen. Outside, the vehicle appears to
accelerate as the light is bent around it. We have to wear
sunglasses or close our eyes as this happens due to a short burst of
ultraviolet radiation. Personally I think it looks like your driving
under a rainbow. After that, it appears to fade to black and remains
totally black until the unit is turned off. We are advised to keep
the windows closed as a great deal of heat builds up outside the
The gravity field also traps a small air pocket around the car
that acts as your only O2 supply unless you bring compressed air
with you. This pocket will only last for a short period and a carbon
sensor tells us when it's too dangerous. The C204 unit is accurate
from 50 to 60 years a jump and travels at about 10 years an hour at
You do hear a slight hum as the unit operates and when the power
changes or the unit turns off. There is a great deal of electrical
crackling noise from static electricity.
The Lense-Thirring Effect
The Lense-Thirring Effect (AKA "rotational frame dragging") was
derived by Joseph Lense and Hans Thirring in 1918 from Einstein's
theory of general relativity which predicts that a massive rotating
body will drag and distort spacetime around itself.
There is an
excellent Wikipedia article on frame dragging at
http://en.wikipedia.org/wiki/Frame-dragging which discusses this effect and provides the Kerr equations for
those interested in the mathematical basis for the operation of John Titor's gravity distortion time displacement unit.
That article uses
this image to illustrate,
"The two surfaces on which the Kerr metric
appears to have singularities; the inner surface is the spherical
event horizon, whereas the outer surface is an oblate spheroid. The ergosphere lies between these two surfaces; within this volume, the
purely temporal component gtt is negative, i.e., acts like a purely
spatial metric component. Consequently, particles within this
ergosphere must co-rotate with the inner mass, if they are to retain
their time-like character."
See the article for the full