Pyramid of Thoughts

D2.1.2. The Telekinetic Effect, and telekinetic motion

In 1924 the great French physicist, Louis DeBroglie, published his important discovery which is sometimes called the “principle of the symmetry of nature”. According to this principle, in our universe everything is strikingly symmetrical in many ways. DeBroglie’s principle provided philosophical and scientific foundations which allow us to understand a number of natural phenomena thus opening them for explorations, discoveries, formulation of new theories, completion of new devices, etc.

For example: the Periodic Table of the Elements (also called the Mendeléev Table), the existence of a mirror duplicate for each elementary particle (e.g. electrons and positrons, protons and antiprotons), and the similarities between atoms and solar systems all these document the symmetry existing in the structure of matter; the similarities between equations that describe different physical phenomena (e.g. Navier-Stock’s equation describing flow of fluids and Laplace’s equation describing heat transfer) express symmetry in the laws of nature; whereas the technological correspondence between e.g. pumps and hydraulic motors or electricity generators and electric motors reflect the symmetry in the operation of technical devices.

One of the vital implications of the DeBroglie’s symmetry, which has a direct bearing on the content of this treatise, is the postulate that “every phenomenon must have a corresponding counter-phenomenon”. So far a large number of phenomena and corresponding counter-phenomena has already been discovered which confirm the correctness of this postulate. For example, the existence of electrical luminescence utilized in electric bulbs to transform electricity into light has a counter-phenomenon in the form of the photoelectric effect that transforms light into electricity.

The so-called left-hand rule, also called the motor effect, which describes phenomena used for the transformation of electricity into motion, has its counter-rule in the form of Fleming’s right-hand rule, also called the generator effect, which works in reverse, i.e. transforms motion into electricity. The Seebeck Effect, which produces a flow of electrons through a junction of two dissimilar conductors being heated, has its counter-phenomenon in the form of the Peltier Effect, which causes the heating and cooling of materials in a similar junction when a current is flowed through it.

The piezoelectric effect which converts the deformation of a crystal into electricity, and which is utilized e.g. in piezoelectric lighters to produce an igniting spark, has its counter-partner in a phenomenon which also is called “piezoelectric effect” although it works in a reversed manner - i.e. it converts the electric impulse into a deformation of a crystal (this counter-phenomenon is utilized for example in piezoelectric vibration generators).

However, contemporary physicists claim that there is an exception to this postulate. They indicate friction to be this exception. According to all to-date claims of orthodox scientists, friction is considered to be the irreversible phenomenon which has no counter-phenomenon. But in 1985, due to the formulation of the new Concept of Dipolar Gravity, I was granted the privilege of discovering the phenomenon which represents an exact reversal of friction. Because in its natural form this phenomenon is manifested during telekinetic (or psychokinetic) motion, I named it the “Telekinetic Effect”. In the same way as friction spontaneously converts motion into heat, the Telekinetic Effect spontaneously converts heat into motion. Not long after the Telekinetic Effect was discovered, I also managed to found technical ways of releasing it (through an acceleration or deceleration of magnetic field force lines).

The gravitational binding which was revealed by the new Concept of Dipolar Gravity and which must occur between matter and counter-matter, means that gravity forces must join every single particle of matter with the corresponding particle of counter-matter, thus forming them into inseparable twin particles. These twin particles can be compared to gravitational equivalents to elementary magnetic dipoles. Each such a twin particle has one of its component (a particle of the matter) prevailing in our world, whereas the other component (i.e. a particle of the counter matter) prevailing in the parallel counter-world. In turn, the existence of these twin particles provides the mechanism that explains telekinetic motion.

Let us now discuss the principles involved in the creation of such a motion.

One of the consequences of the joining of each particle of matter with a duplicate particle of counter-matter is that all material objects existing in our set of dimensions (i.e. in our world) must have their counter-gravitational duplicate existing in a parallel set of dimensions (i.e. in the counter-world). Actually the existence of this counter-material duplicate can already be conclusively proven with our present technology by showing it with the use of Kirlian cameras. The best experiment which proves the existence of counter-material duplicates is the “leaf ghost effect” described by Daniela in subsection C9 (in this effect the Kirlian camera shows the shape of a counter-material duplicate of a whole leaf, even if someone cuts this leaf in half and puts on the camera only a half of it).

The mutual relationship between each material object and its counter-material duplicate is an analogy to an image and its mirror reflection, or to computer hardware and software, or to the idea of ‘body’ and ‘soul’ postulated by various religions. Similarly like an image and its mirror reflection, both parts of an object are exact copies of their opposite duplicate, and also exactly imitate each other’s movements. Moreover, both -the material object and its counter-material duplicate - can also be independently taken hold of and dislocated in space. But because of the gravitational links between them, independently of which part is grabbed and dislocated first, the other part must imitate exactly its motion.

For this reason, depending on which part of an object is grabbed first and thus first dislocated in space, the new Concept of Dipolar Gravity distinguishes between two different types of motion, i.e. the “physical motion” and the “telekinetic motion”. The physical motion occurs when the material part of an object is moved first, whereas the counter-material duplicate is pulled behind it by forces of the gravitational links. The telekinetic motion occurs when the counter-material duplicate is moved first, whereas the material part of this object is pulled behind the counter-material duplicate by forces of their mutual gravitational links.

To illustrate this with an example, the Concept of Dipolar Gravity shows that the telekinetic motion is like forcing an object to move by shifting its reflection in a mirror, so that this re-located reflection causes the object to move also. Of course in order for this example to work in reality, light would need to behave like gravity forces. The other, even more illustrative explanation for the telekinetic motion would be to liken it to “shifting material objects by dislocating their counter-material ‘souls’”.

The above explanation for telekinetic motion also provides the other definition of the Telekinetic Effect (i.e. the definition parallel to that stating that it is a reversal of friction), and reveals the mechanism which causes it. Thus, the definition of this effect is as follows.

“The Telekinetic Effect is a phenomenon of the indirect manipulation of an object obtained via the interaction with the counter-material duplicate of this object.”

This definition explains that the Telekinetic Effect is, amongst others, the source of telekinetic motion in a manner similar as the physical force is a source of physical motion. But there is a whole range of differences between the physical force and the Telekinetic Effect (this is why, in the explanations which follow, I avoid using the term “force” for naming the motion-creating product of the Telekinetic Effect, and rather name it with the term “thrust”). The most important of these differences is that the Telekinetic Effect does NOT exert (return) a reaction force to its cause.

(For a physical force, every action must produce an equivalent reaction force to be returned to (exerted upon) the object causing this action). Practically this means that the increase in work completed by the Telekinetic Effect does not involve any change in the amount of energy required for the release of this effect. Moreover, the support of such telekinetic devices does not require any force, no matter what weight they lift.

This suggests that a device that releases this effect can also be suspended in space, and that the lack of reaction forces allows it to remain unaffected independently of the scale of actions that it causes. Also, for example, a portable telekinetic crane lifting any object (e.g. a building or a huge rock) can be held in a child’s hand without any effort. Furthermore, this implies that the Telekinetic Effect allows actions which are physically impossible for forces, such as someone lifting himself up into the air - see self-levitation (as we know, the impossibility of achieving self-levitation with the use of physical forces is expressed in numerous jokes about someone lifting himself by pulling up his own hair).

The other major difference between the Telekinetic Effect and a physical force, is that the Principle of Energy Conservation is satisfied for the Telekinetic Effect due to a spontaneous extraction of thermal energy from the environment by a telekinetically moved object itself. Therefore the completion of a telekinetic work does not require any external energy supply. This in turn leads to a number of phenomena explained later, such as the cooling down the environment of objects shifted telekinetically, emission of a subtle “extraction glow”, etc.

One of the most important achievements of the Concept of Dipolar Gravity is that, while indicating the existence of the Telekinetic Effect, it also postulates two different methods of triggering (releasing) it.

These are:

(1) the biological method, and

(2) the technical method.

In the biological method the Telekinetic Effect is produced through the employment of a natural capability of the brain, or more precisely - the part of the brain called a “pineal gland”. There are numerous versions of this effect produced biologically by the human brain (e.g. telekinetic healing, bending spoons), many of these are discussed in monograph [1/3]. One of the most spectacular examples of such biologically released human telekinesis is called “psychokinesis” (PK). Other popularly known examples include levitation and radiesthesia (i.e. the telekinetic bending of divining rods).

A form which depends on a psychokinetic release of a huge quantities of heat at the moment of experiencing a shock, is the so-called “spontaneous human combustion”. Theoretically speaking, most probably also some animals are capable of the formation of telekinesis to enhance their vital biological functions.

In the technical method the Telekinetic Effect is produced through the acceleration or deceleration of magnetic field force lines, and its action includes all objects contained in the area so activated. Thus, whenever any material object is placed within a space in which a magnetic field prevails, and then force lines of this field are subjected to a vector of acceleration, the object tries to move in the same direction as the direction of the vector which represents the acceleration of magnetic field force lines.

This tendency (thrust) of an object to move in the same direction in which magnetic field force lines are accelerated, constitutes the technical version of the Telekinetic Effect. In this treatise only the subject of technically induced telekinetic phenomena is covered, thus the technical method of releasing the Telekinetic Effect will mainly be examined here. But a number of observations gathered for this method apply also to the biological telekinesis.
Because the Telekinetic Effect is always released by the magnetic field which is accelerated in an appropriate manner, the field which displays the capability to release this effect can be called the telekinetic field.

Thus the name “telekinetic field” is assigned here to a dynamic version of magnetic field, the force lines of which are subjected to a form of motion which creates a non-balanced vector of acceleration (i.e. the telekinetic field will always move in such manner that it creates a vector of acceleration which acts in one direction and is not balanced by another vector of deceleration acting in an opposite direction). As such the telekinetic field displays a number of unique properties, for example it is active telekinetically and thus the Telekinetic Effect acts on every object and substance contained within the range of this field, it affects (telekinetizes) all kinds of materials - not just ferromagnetics, etc.

Of course there are numerous methods of transforming a magnetic field into telekinetic field, for example it can be done through non-symmetrical pulsations, through rotation around an axis which does not coincide with the magnetic axis of the field itself, through moving along appropriately designed curvilinear path, through dynamic colliding two magnetic fields, etc. My theoretical analyses revealed that the telepathic pyramid described in this treatise must release a significant amount of such active telekinetic field.

At this point it is worth stressing that the old concept of monopolar gravity still adhered by the majority of our scientists is unable to provide any explanation for the nature of telekinetic motion, in spite of the enormous body of evidence that documents the existence of this phenomenon. This provides an excuse for a large number of contemporary scientists to refuse the acknowledgement of telekinesis, and to discourage any attempt to investigate telekinetic motion. Moreover, this old concept does not allow for any reasoning concerning the attributes of this motion or the technological ways of releasing it.

Of course, now when the new Concept of Dipolar Gravity explained what telekinesis is, and when numerous publications describing this explanation are readily available, further insisting on these old views can only be explained by one cause: it must be manipulated into minds of selected scientists by our cosmic parasite.

An important part of the new Concept of Dipolar Gravity is the interpretation of the Energy Conservation Principle, as applied to telekinetic motion. The new Concept of Dipolar Gravity states that laws prevailing in the counter-world must be a reversal of laws prevailing in the material (our) world. This also means that friction and energy consumption - so characteristic of the material world, are non-existent in the counter-world. Therefore, if the motion of any object is begun in the counter-world through a dislocation of the counter-material duplicate of this object, then the cause of this motion does not need to provide any energy.

But the motion of the material part of this object in our world must obey the Conservation of Energy Principle. Because the cause of the telekinetic motion does not provide the energy required to satisfy this Principle, the material part of the object moved telekinetically must achieve this by itself. Therefore, during telekinetic motion, the material part of the object moved must spontaneously exchange thermal energy with the environment (i.e. absorb or release heat). The necessity for this exchange is called the “postulate of spontaneous heat exchange between the telekinetically affected objects and the environment”.

This postulate is responsible for two observable consequences, namely:

(1) it produces a change in the environmental temperature during every telekinetic motion (e.g. the completion of a telekinetic work causes a rapid drop in the environmental temperature), and

(2) it produces a faint glow, called the “extraction glow”, which is emitted from the matter (space) surrounding the telekinetically moved objects.

By being one of the most primary phenomena originating from the counter-world, the Telekinetic Effect bears potentials for countless practical applications. I already managed to identify several of them. The most important of these applications, which displays the direct connection with pyramid described in this treatise, is electricity generation. Theoretically speaking in order to generate electric currents via the use of the Telekinetic Effect it is enough to release it in a wire and allow it to push all free electrons in one direction. The motion of all these electrons would constitute electricity.

The energy which would sustain this process would originate from the environment, from which the Telekinetic Effect would spontaneously extract thermal energy due to its capability to act as the reversal of friction. The attractiveness of this process becomes especially obvious for two reasons. Firstly it does not require a gradient of temperature in order to extract the thermal energy from the environment. Secondly, according to the behaviour of the Telekinetic Effect, the efficiency of the process should significantly exceed the barrier of 100%.

This means that much less energy would be required to release the Telekinetic Effect than this effect would then extract from the environment. Of course - as I already explained this in subsection D1.1, when I realized what it involves to produce electricity with this method, I invented and designed a device, named the “telekinetic battery”, which implements this method practically. Further details about this device are provided in subsection D2.4.

It should also be added to all the above that the Telekinetic Effect is a phenomenon which manifests itself in a wide range of different disciplines, applications, and devices. Actually it appears in every situation where some kind of magnetic field is subjected to acceleration or deceleration.

For example only in my monograph [1/3] its successful utilization in propelling devices, electricity generation, chemistry, medicine, and farming are presented. Its further manifestations in pure form involve numerous paranormal phenomena (e.g. levitation, psychokinesis, bending of water divining rods, etc.), many previously unexplained behaviors of elementary particles (e.g. tunnel effect), some anomalies noted in physics of rigid bodies (e.g. directional steadiness of gyroscopes which until the discovery of the Telekinetic Effect could be described only in category of its effects not in category of mechanism which causes it), or various inconsistencies in electrical phenomena (e.g. Faraday Disc effect which was utilized in the first electricity generator on Earth).

Of course, apart from the above, there are numerous other manifestations and applications of this effect, which are not possible to accommodate in this limited treatise. Stating all this tries to realize that the Telekinetic Effect is one of the most primary phenomena of nature, since it manifests itself in so many ways, areas, and applications.

Yet, scientists who represent each such discipline, application, and invention, so-far believe that they deal just with some conjunction of favourable circumstances which is local, unique for their area, and which by a coincidence provides them with the principles they utilize. Because of such an attitude, this omnipresent and important effect remained unnoticed to the science for so long, and - of course, as the result also remained unharvested. It is about a time that we change the way we think about the reversal of friction.

By recognizing this new, omnipresent, and important phenomenon, we should make a start on implementing it for the benefit of our civilization.

Top

D2.2. The main components of the telepathic pyramid

Although all main components of this pyramid were already described in chapter C, this previous description was unrelated to my theories, and therefore incompatible with the explanations from this chapter. For this reason I am going to describe it again. In the wave braces {like these} I added the technical details and explanations which are not provided in the original report of Daniela, or not obvious from the prototypes she completed, but which are outcome of my research on telekinetic batteries, or on telepathic waves.

I intentionally distinguished the details that I introduced from these repeated by Daniela, so that they are separated from the original disclosure and enable the future builders of this device to question or to approve the correctness of my deductions.

The external appearance, the design, and main components of the telepathic pyramid are illustrated in Figure C3. This device is around 27.5 cm height. {In the geometrical sense it represents a “isometric pyramid”, i.e. the one in which height base-to-top (h=27.5 cm) is equal to the side dimension (a=27.5 cm) of the square base. The main dimension (h=a) is equal to around half of a unit of length named “cosmic cubit” - which seems to be used by many civilizations as a kind of universal unit of length.

The pyramid’s main components include:

“framework” (F) made of copper wire {of around f = 5 mm thick}, and

the hermetic “casing” (P) shaped into a pyramid made of a glass or plexiglass that hermetically encapsulates this framework.

The framework (F) is composed of eight straight pieces of thick copper wire (four pieces of around l=32.7 cm long for pyramid’s sides, and four pieces around a=26.5 cm long for pyramid’s base) welded together or bend in such a manner that they form edges of a pyramid that well fits inside of the casing. In turn casing (P) is composed of five plates (i.e. one square with side dimension of around “a=27.5 cm”, and four isosceles triangles with the base equal to around “a=27.5 cm”, and the height equal to around “hl=30.8 cm”) which are made of robust milky or transparent material (e.g. glass or plexiglass) of around 5 mm thick.

All these plates are so glued together that they form a pyramid in which the height “h=27.5 cm” is equal to the side dimension of the square base “a=27.5 cm”. {Note that in the final, operational model of this pyramid, the casing must be made of milky-transparent material, because the operation of this device is based on the interference of standing waves of light formed by the pyramid, with the user’s aura.

Therefore a transparent casing would allow the disturbing noise light signals to enter the pyramid. However, from the first experiments with these pyramid, and also from the analysis of its operation, it is obvious that building a working prototype of this device is a laborious process which requires a lot of improvements and fine tuning (see subsection D2.6.1), thus which almost for sure is not able to provide a working prototype in a first go. Therefore, for experimental purpose, it is much better to build first prototypes with a crystal-transparent casing, as such casing enables a better observation of the pyramid’s interior during the first experiments.

Only when the prototypes start to work and the user’s thoughts start to modulate the pyramid’s oscillations, then this transparent casing should be exchanged into a milky one.} The pyramid’s casing (P) encloses not only the copper framework, but also all other components and circuits of this device, thus allowing to keep vacuum in the interior of this device. On each side wall of casing (P) a round “disk” (D) is assembled.

These four disks are made of aluminium plate. One of them has a hole of around d=3 to d=5 mm in diameter in its centre. When they are glued to side walls of the pyramid, their location is so selected that they do not touch any other conductive component of the pyramid -especially spiral © and framework (F). {Disks (D) form a “telepathic resonance cavity”, the four ‘deflectors’ of which -i.e. four disks (D), are concentrating the resonating telepathic signal on the quartz crystal (Q).

My theories suggest, although this was not indicated in the original report of Daniela, that these disks are also performing additional function of plates of a vacuum capacitor - hence the importance of vacuum inside of the pyramid. The hole inside of one of these disks is to calibrate/select the frequency of telepathic wave that is allowed inside of the pyramid, and to define the initial conditions of deflection and resonance of this telepathic wave.} Inside of the pyramid a spiral “coil” © made of seven coils of a copper wire around f=5 mm thick, is suspended from the pyramid’s apex.

This spiral (C) cannot touch the disks (D), although is connected with the frame (F). In the centre of pyramid, approximately at ¼ of its height from the base, a quartz “crystal” (Q) is suspended.

{This crystal should be spherical or ellipsoidal in shape. None of its dimensions should exceed the diameter “d” of the hole in one of aluminium disks. The exact positioning of this crystal is to be determined at the “fine tuning” stage of the pyramid’s development, as the “telepathic focal point” in which it is to be suspended decides about the frequency of telepathic waves that act on the crystal, and thus determine the harmonic compatibility between the crystal and the resonance cavity of the pyramid. The usual way this crystal is suspended exactly in the “telepathic focal point” is by stretching it tightly with the same wires that connect it to the pyramid’s circuitry.}

The pyramid contains also two “inductors” (I1) and (I2). Each one of them is obtained through orderly winding respective number of insulated copper wire on a permanent magnet. The next component of the pyramid is a “tube” (T), called a “phial” by Daniela. This tube (T) is a vacuumed glass ampoule, the volume of which is filled up half volume with mercury, half volume with kitchen salt, and which has two electrodes inserted at both ends. In four corners of the Daniela’s pyramid four “cascades of mirrors” (M) are placed.

{However, I believe that these cascades should rather be placed in centres of each side, so that together with the tube (T) they could form effective optical interference cavity.}

Each of these cascades is composed of three small mirrors, the dimensions of which are descending.

{These four cascades of mirrors (M), together with the tube (T), are forming an effective optical “interference cavity”. This cavity serves the formation of an optical connection between the user’s biofield, and the electrical oscillations that are induced in the pyramid. Therefore, in the telepathic pyramid described here, the cascades of mirrors (M) which are deflecting back the light produced by tube (T), and which sustain the interference between the user’s biofield and this light, are performing the function of a “thought microphone” and “thought speaker” which “intercepts” and “alters” the user’s thoughts. Because of the use for formation of this cavity, the dimensions and shapes of individual mirrors should be so selected that in each of them around 1/3 surface of the tube is reflected, and that the largest mirror could fit the whole picture of the tube (T), whereas in the smallest mirror only around 1/3 of the picture/deflection of the tube is deflected.}

The manner in which all elements of the telepathic pyramid are electrically connected (wired) with each other, is shown on the diagram from Figure D1. These connections form several electronic circuits, the most important of which is “electronic resonator”. More regarding these electronic connections is stated in subsection D2.4. However, note during the analysis of this electric diagram that the majority of connections shown there are not originating from the disclosure of the “little being with blue eyes”, but were worked out by myself on the basis of my theories which explain the operation of telekinetic batteries and telepathysers.

These connections which were recommended in the original disclosure, on the diagram from Figure D1 are marked with continuous lines, so that the reader could distinguish them from connections which I worked out, and which I illustrated on this diagram with broken lines so that the device developers are aware that these my connections not necessarily are absolutely correct.

Top

D2.3. The use of the telepathic pyramid as a telepathyser

In order to facilitate the understanding of principles applied in the operation of this pyramid, which are to be explained in subsections that follow, I start my technical disclosures from explaining how to use a couple of such pyramids as two telepathysers that converse with each other. Our knowledge as how to use these devices should form a frame of references which could be very helpful in understanding further explanations which describe how these pyramids work.

Furthermore, such frame of references should allow us to understand the design conditions and limitations that this device is subjected to. Here is an explanation how to use two identical such pyramids so that they converse with each other as telepathysers.

The first one of two identical pyramids - let us call it “emitter”, is held between hands of one person, while the second one - let us call it “receiver”, is held between hands of another person some distance apart. Both pyramids that are to converse with each other, are tuned to exactly the same parameters of operation (e.g. they are tuned to the telepathic wave of the same frequency, their resonance chambers resonate at the same frequency, and also their electrical resonators generate the same frequencies), and also they face each other with the disk which has a hole in its centre.

The pyramids are also held in such a manner that their bases are resting on the open palm of one hand of their users, while the open palm of the other hand of their user rests on pyramids’ apexes - see Figures C1 and C2. In this manner the pyramids’ interior (or more strictly - their optical “interference cavity”) are closing the circuits of bio-fields of their users. The way these pyramids are held (i.e. so that the optical interference cavity is closing the bio-circuit of the user) allows the user to tune his/her bio-field into the telepathic sensors of these devices. Thus, these sensors are only intercepting thoughts of their users, while the influence of outside “noise signals” is eliminated.

The thought of every person, including also the person who holds the transmitting pyramid, manifests itself, amongst others, as vibrations of bio-field of this person. In turn this vibrating bio-field is interfering with the standing optical wave that is formed in the optical interference cavity -namely between cascades of mirrors (M) and the tube (T). Therefore whatever this person thinks, it is superimposed onto the optical wave that bounces between the cascades of mirrors (M) and the tube (T).

In this way, thoughts of the first person, due to feedback that is formed between the bio-field of this person and the optical interference cavity held in hands of that person, are modulating the oscillations of electrical currents that flow in the circuitry of the pyramid. Then these electrical currents, in the coil © are transformed into oscillations of magnetic field emitted by the pyramid. In turn these modulated with thoughts oscillations of the magnetic field are instigating vibrations of the counter-matter, which (the vibrations) are propagating throughout the counter-world as modulated telepathic waves.

The second telepathic pyramid, which operates exactly on the same parameters as the first one, but is held by another person, intercepts these telepathic waves. After interception, it transforms them into oscillations of the electric field, to finally turn them into the vibrations of biofield of the receiving person. The thoughts that are carried out by these vibrations of the bio-field are superimposed on thoughts of the receiving person. Thus, this another person perceives these superimposed thoughts as thoughts which were communicated to him/her at a distance without the use of speech.

Because each of two pyramids hold by these two people is simultaneously performing the function of transmitter and the function of receiver (i.e. works in the “duplex” system), therefore between both people a kind of silent conversation is going on, where the communication is occurring by the means of exchange of thoughts.

The above description as how to use the pyramid reveals that in the operational sense it is quite similar to today’s cellular phones, or radio-communication devices. Only that instead of electromagnetic waves it uses the modulated (analog) telepathic waves that propagate in the counter-world, and also that instead of speech it uses the exchange of thoughts.

Therefore one of the most vital condition of such communication via pyramids described here, is that both pyramids which converse with each other must keep the frequency of their telepathic vibrations on exactly the same value. Of course, no matter what is the frequency on which both pyramids are conversing, the communication still will occur if both pyramids are able to precisely tune into it (similarly as today radio-communication devices can converse on any frequency, if both sides are able to tune into it).

Of course, there are also cases, when only a single pyramid should allow to provide an effective exchange of thoughts. Their example may be a case, when the thought communication occurs between two people who are so close to a pyramid that both of them can permeate the interference cavity with their biofield (e.g. when both of them can hold simultaneously the same pyramid).

The other example could be when someone uses only a single pyramid in order to intercept (eavesdrop) telepathic messages and orders that are beamed towards Earth by our cosmic parasites, or telepathic conversations that are carried out between these parasites and their earthly collaborators.

Top

D2.4. The operation of the telepathic pyramid as a telekinetic battery

As this was explained in subsection D1.1, when Daniela wrote this important letter of 27 June 1993, in which she disclosed the design of the telepathic pyramid, I was already carrying out the research on the telekinetic battery for over 3 years. Therefore, when her pyramid arrived to my hands and I started to analyze it, I instantly recognized that apart from the telepathyser, it also performs the function of a telekinetic battery. This in turn realized to me that the principles of operation of the pyramid described here constitute a combination of two separate devices, namely a telepathyser, and a telekinetic battery.

Both these devices:

are superimposed on each other
are using exactly the same components (i.e. each component of the pyramid performs dual functions, one for the telepathyser, other for the telekinetic battery)
are supporting each other in their operation (i.e. the telekinetic battery supplies the pyramid with electric power which is then needed to make the telepathyser work)
from the functional point of view are forming a single device. Because of this dual operation of the pyramid described here, each of its componential devices requires a separate description

The explanations of these two devices I intend to start in this subsection from the telekinetic battery. Note that the “pure form” of such battery is extensively described in subsection K2.4 of monograph [1/3], so here only these descriptions will be provided which are necessary for understanding how this pyramid operates.

Before the technical description of the operation of this pyramid as a telekinetic battery is provided, I should elaborate further on this duality of components’ functions. This duality means that every single component of the telepathic pyramid is fulfilling as many as two separate functions, one for the telepathyser, the other for the telekinetic battery. But the requirement is that in physical sense both these functions are very similar and utilize the same kind of phenomena. For example, the tube/phial (T) is a supplier of the additional “axes of freedom” for the telekinetic battery, but also it is a “thought microphone” and “thought speaker” for the telepathyser.

In turn the conical coil (C) is a plate of an electric capacitor for the telekinetic battery, and also a telepathic broadcasting antenna for the telepathyser. The quarts crystal (Q) is a piezoelectric generator of the initiating electric oscillations (a pulsar) for the telekinetic battery, and also the receiving antenna and demodulator for the telepathyser. Etc., etc. In this subsection only functions performed by these components for the operation as a telekinetic battery are discussed. However, in subsection D2.5 also functions performed by the same components when functioning as a telepathyser are going to be elaborated.

The components of the pyramid discussed here, which form the telekinetic battery, can be classified into several separate devices, or basic electric circuits -see Figure D1. These devices, or basic circuits, are synchronized with each other electromagnetically, although are independent functionally.

The include:

(1) a pulser

(2) a tube

(3) a resonator

(4) two field-deforming, permanent magnet inductors (the first of which is telekinetically thrusting forward, the second is telekinetically thrusting backward)

Here are descriptions of these devices, or basic circuits.

A pulser (Q). Its basic function is to induce the initiating electrical signal. It is composed of a quartz crystal (Q) and a telepathic resonance cavity formed from four disks (D) which focus on this crystal the incoming telepathic waves. The electrical oscillations formed by this pulser originate from the oscillating piezoelectric effect occurring cyclically in the quartz crystal (Q). This crystal is vibrated by the incoming telepathic waves which have the frequency harmonic to that of the crystal itself, and which are focused on the crystal by four disks (D). These incoming telepathic waves cause the vibrations of the counter-material duplicate of the crystal (located in the counter-world).

In turn the vibrations of the counter-material duplicate are being passed onto the material structure of the crystal located in our world, according to the principles of telekinetic motion described in subsection D2.1.2. Of course, when the material structure of quarts starts to vibrate, then -according to principles of piezoelectric effect, it generates impulses of electric energy. These electric oscillations are being conducted from the crystal into the circuitry of the telekinetic battery and telepathyser.

The quartz crystal (Q), which is a main component of the pulser, provides also the resonator ® with a “reversible component”. In turn this reversible component is a source of an important property “inertia” for the telekinetic battery. In subsection D1.1.1 it was described that this property results from the “piezoelectric effect” working in both directions, i.e. converting crystal’s physical vibrations into electrical impulses, but also converting electrical impulses into physical vibrations. Such a reversible component is a necessary requirement for the resonator ® to become “reciprocal”, and thus to allow it to work as a telekinetic battery.

This ability of the quartz crystal (Q) to reverse its operation and to work in both directions, results from the nature of piezoelectric effect that this crystal contributes to the pyramid’s circuitry. The piezoelectric effect always work in both directions, namely it is capable to convert a deformation into electric impulse, or convert electric impulse into a deformation. Therefore it provides the pyramid with necessary inertia which in turn converts the chaotic energy impulses that act on the circuitry of this device into an uniform AC electricity.

If one would like to compare the function of the pulser to something that we know in present technology, then the closest comparison would be to clocks in computers which generate the timing cycles on which the whole operation of the computer is based.
Tube (T) - in Daniela’s descriptions called phial. It is a vacuumed glass ampoule filled up half with salt, half with mercury. The more complete description how to make this tube is provided in subsection D2.6.2.

The main function of the tube (T) is to provide the “resonator” ® with an extremely important electronic property, which (the property) is absolutely necessary to make this resonator “reciprocal”. This property in subsection D1.1.1 was described as the ability to self-initiate the oscillations. As this was already explained in subsection D1.1.1, the “reciprocal” oscillatory circuit used in a telekinetic battery must be able to self-initiate regular oscillations each time it is supplied with energy at a required level, even if parameters of this energy each time are different.

For example circuits used in electronic watches are reciprocal because they always start regular oscillations each time someone supplies a battery into these watches, even if this battery is half-dead. Also old railway steam engines were reciprocal because they begin to produce oscillations of their pistons and motion of their wheels each time someone supplied them with steam, even if this steam each time had slightly different pressure. But swings in our parks, and combustion engines in our cars, loose their capability to be reciprocal, because they are not able to start their oscillations without initiating them with energy impulses that have appropriate parameters.

The theory behind the telekinetic battery, outlined here in subsection D1.1.1, and described in all details in subsection K2.4 of monograph [1/3], states that in order to make this device capable to self-initiate its oscillations, it needs to contain a number of oscillation-producing components, which are connected together in parallel, and which are mutually shifted in phase. In case of the telepathic pyramid described here, this condition is fulfilled by the tube (T). This tube contains thousands of salt crystals, and also contains mercury which electrically connects these crystals in parallel.

Each crystal is a miniature piezoelectric oscillations generator, which feeds the pyramid circuit with its own oscillations. Electrical axes of all these countless individual crystals are oriented at random, in a different direction. Therefore the oscillations that each one of them is producing, are mutually shifted in phase, in the same manner as oscillations of two pistons in a locomotive were shifted. So the final outcome of their combined action is that they supply the pyramid with the capability to self-initiate the oscillations.

Furthermore, because the pyramid’s resultant oscillations are actually a combination of individual oscillations of these countless crystals, the tube (T) additionally causes that the pyramid’s oscillations have a countless number of degrees of freedom, as stated in subsection D1.1.1.
Resonator ®. It is a name assigned to an electronic circuit which from the point of view of electronic circuitry is simply an “oscillatory circuit”. But in the telekinetic battery this resonator must additionally fulfill the primary requirement that it is a “reciprocal” oscillatory circuit. As every other oscillatory circuit, in the pyramid described here the resonator ® is combined from electrical inductances and capacitances appropriate connected to each other. Inductance is provided by two inductors (I1) and (I2).

In turn electrical capacitance is provided by the vacuum capacitor. This vacuum capacitor is formed by two plates placed close to each other. The first of these two plates is made up from such components of the telepathic pyramid as aluminium disks (D1, D2, ... D4). In turn the second plate is made up from framework (F) connected with conical coil ©. In addition to the inductors and the vacuum capacitor, the inductor ® includes also tube (T), and is connected with a quartz crystal (Q), both of which supply it with the necessary ability to “reciprocate”.

The main function of the resonator is to form a sequence of steady electrical oscillations which bounce forth and back within the pyramid’s circuitry, in both directions passing through inductors (I1) and (I2). These steady oscillations are characterised with the oscillatory flow of electric charges from the disks (D), via inductors (I1) and (I2), to framework (F) and coil ©, and then back from framework (F) and coil ©, via inductors (I1) and (I2), to disks (D). In turn such cyclical flow of electric charges, back and forth, enables the telekinetic generation of electricity in inductors (I1) and (I2).
Field-deforming inductors (I1) and (I2). While all previous components of the telekinetic battery try to prepare the right conditions which trigger the telekinetic generation of electricity, the field-deforming inductors (I1) and (I2) are these components which actually carry out this telekinetic generation of electric currents.

In order to understand how these inductors generate electricity, it is necessary to remind ourselves what in subsection D2.1.2 was stated about a technical manner in which the Telekinetic Effect is produced. As it was explained over there, in order to form the Telekinetic Effect, force lines of a magnetic field must somehow be accelerated. In turn, if such a Telekinetic Effect is produced within the volume of a wire, then the telekinetic thrust that it creates must push forward all free electrons from this wire, thus forming an electric current.

If one considers an ordinary oscillating electric current flowing through a wire, this current must produce a pulsating magnetic field, as principles of electromagnetism make it to do. In turn when a magnetic field pulsates, practically this means that it is cyclically accelerated and decelerated in one direction, then accelerated and decelerated backward in other direction. Thus every pulsating electric current creates two balanced cyclical Telekinetic Effects, which are oriented in opposition to each other, and thus which cancel each others action.

However, if we now put this wire across a constant magnetic field, then situation drastically changes. The constant magnetic field interacts with the field formed by the wire’s electric current, deforming curves according to which this wire’s own field pulsates. The result is that these deformed curves of pulsations, this time do not balance the acceleration and deceleration of wire’s own magnetic field in both directions. Therefore in a wire which is placed across a constant magnetic field, a non-balanced Telekinetic Effect is produced which acts stronger in one direction than in the other.

In turn such a non-balanced Telekinetic Effect produces a non-balanced “telekinetic thrust” which pushes free electrons mainly in one direction, thus generating a flow of current through this wire.

Exactly the above is utilized in the pyramid’s inductors (I1) and (I2). These two inductors actually produce a non-balanced Telekinetic Effect, which in turn generates the electric current.

The key to the operation of these field-deforming inductors lies in making them by orderly winding of copper wires around strong permanent magnets. The effect of such winding is, that the pulsating magnetic field formed by oscillating currents which flow forth and back through these inductors, are deformed in a non-balanced manner. In turn this non-balanced deformation of the wire’s own field is supporting the production of a non-balanced Telekinetic Effect - see subsection D2.1.2.

The property of such non-balanced Telekinetic Effect is that it tends to push free electrons contained in a wire mainly in one direction. The result is that the Telekinetic Effect causes the cumulative growth of the current’s power, thus enabling both inductors to produce free electrical energy which is sufficient to satisfy later the pyramid’s energy consumption. Of course, because the oscillatory electric currents flow through these inductors in both directions, it is desirable that the telekinetic thrust is also created in both these directions. Therefore, there is a need to use two such inductors, namely (I1) and (I2), each one of them winded in an opposite direction, so that each one of them is producing the Telekinetic Effect in a deferent half-cycle of the current’s oscillations.

The operation of the telepathic pyramid as a telekinetic battery is as follows - see the diagram from Figure D1. The telepathic resonance chamber formed through appropriately selected and shaped pyramid’s cavity, is choosing from the chaos of all telepathic vibrations only these vibrations the frequency of which coincides with the own frequency of the quarts crystal (Q). These chosen telepathic vibrations are then focused by disks (D) on crystal (Q). The action of these vibrations is instigating the crystal (Q) in the state of resonance.

Thus the crystal (Q) vibrates violently. The piezoelectric effect which this crystal (Q) is able to form, transforms these violent vibrations of the crystal (Q), into series of electric pulses. The resonator ® utilizes the special capability called here the “reciprocation”, which is provided by the tube (T), to turn these series of pulses into regular electric oscillations. The current of these oscillations flows initially forth, from the disks (D) which constitute one plate of a vacuum capacitor, through both inductors (I1) and (I2), to coil © and framework (F) which constitute the second plate of a vacuum capacitor.

Then the same current of these oscillations flows back, then forth, etc. In normal circumstances the internal electrical resistance of this circuit would cause that the current’s flow would never exceed the value detectable by our instruments. But in case of the telepathic pyramid, it flows through inductors (I1) and (I2), the unique property of which is that they produce a non-balanced Telekinetic Effect, which increases the flow of current. This non-balanced Telekinetic Effect one could liken to a series of slight pushes that someone adds in correct moments to an already moving swing, thus gradually increasing its kinetic energy.

In the final effect, the telekinetic vibrations that are initiated by the quartz pulsar (Q) and transformed by quartz into electric pulses, are then developed and uniformed by the resonator ®, increased and energitised by inductors (I1) and (I2), to produce a powerful electric current which supplies the whole pyramid in the required energy. In special circumstances explained in subsection D2.4.1, the electrical energy produced by this pyramid can also be utilised for industrial purposes, for supplying in free energy various external devices.

The result of the operation of telekinetic battery described in this subsection is that it produces an alternating electric current (AC). Because the pulses of this current are so deformed that it produces a Telekinetic Effect, it is not a typical AC current, but a special one (telekinetically active). If used for domestic or industrial purposes, such a telekinetically active current will turn to have various special properties, for example it will develop health -as it generates the same Telekinetic Effects which healers are providing during healing sessions, it also will facilitate telepathy, increase ESP potentials, etc. Therefore the device described here can work as a very special generator of alternating electricity. Because of this capability, the pyramid described here can also be modified so that it used exclusively for the generation of healthy electricity - see subsection D2.4.1. In such application it will constitute a very special source of free electrical energy.

Of course, the operation of the pyramid described here as a telepathyser is not dependent on the previous making this pyramid to work as a telekinetic battery. This is because the pyramid can also be successfully supplied in energy from an external source of an alternating current (AC). In such case the (AC) electricity must be supplied to both poles of the quartz crystal (Q).

At the end it should be emphasized here that the formulation of pyramid’s circuitry, as explained above, imposes several important conditions on the design and operation of this device. Some of these conditions were already mentioned in chapter C. To indicate the most important of these: it is the requirement of “harmonic parameters”. This means that the frequency of the own vibrations of the quartz crystal (Q) must be equal, or harmonic, to the frequency of the electric resonator ®.

In turn these two must be equal, or harmonic, to the frequency of resonance chamber formed by aluminium disks (D) and thus with the frequency of incoming telepathic wave. Of course, the pyramid must also fulfil several technical requirements as well (i.e. requirements resulting from the principle of operation that it implements). Their example can be the requirement that the shape of the quartz crystal (Q) must be such that it allows the best possible interception of the telepathic wave (it is quite possible that the best shape would be an ellipsoid small enough to pass through the hole in one of the aluminium disks).

Top

D2.4.1. Modifications of the pyramid to be used as free energy devices

It is not difficult to notice that circuits of the telepathic pyramid described in the previous subsection, can easily be modified to work exclusively as a telekinetic battery. The only changes which this modification would require is to remove all elements which are not needed to make it work as such a battery (i.e. to remove all components introduced to the pyramid to make it work as a telepathyser, for example frame and coil). If such removal is carried out, then all circuits and functional components of the pyramid can be formed as laminated conductive layers glued to the flat walls of the pyramid (for example inductors could be formed as strips of copper foil winded around the pyramid’s apex, the reciprocal tube could be replaced with several semiconductive oscillators which are connected in parallel to provide more then one axis of freedom and other required properties, etc.).

The resultant device would be capable of producing free electricity, while the pyramids would appear as if it is almost empty inside and has no moving parts or separate components. After such a modification, the telepathic pyramid would produce electrical power without being supplied in any fuel or any other form of energy.

Because of the possibility of such modification, the pyramids similar to one described here, which will be very simple in manufacturing and very handy in use, in not-to-distant future may become the primary source of electrical power used in every home. Today’s powerhouses, powerlines, and home mains, may become completely obsolete by these extraordinary pyramids.

As it is noticeable from the today’s observations of UFOs, our cosmic occupants have already, and commonly use, this kind of telekinetic batteries shaped as laminated pyramids empty inside. As some informers claim, this kind of pyramids is even a standard equipment of every cosmic spy and saboteur that our cosmic parasites place on Earth for a longer period of time.

They are to supply these UFOnauts in required electrical power, and also make independent the operation of their devices from earthly supply of energy. Because of the distinct shape of this device (namely a metallically laminated pyramid which is empty inside), and because it supplies the required amount of electrical energy, this device is very easy to be noticed and remembered by people who are taken on decks of UFOs.

Someone who wished to appear under the pseudonyme “Richard Williams” - i.e. one of the first aware UFO abductees which I personally know and investigated in New Zealand, in fact did see this device on a UFO deck, and reported to me this sighting.

Here is how he described to me a pyramid which he not only seen in operation, but also took to his hands, dismantled, and thoroughly examined:

“I asked my host {UFOnaut} how they satisfy their energy consumption. Instead of answer, he demonstrated to me a device which he described as their standard electricity generator. The device had a shape of a small pyramid. It had a square base of the side dimension around 550 mm. It was made of a material that looked as a plate around 7 mm thick, the composition of which reminded me our present laminates. This pyramid weighted around 3 kilograms. The host took it to his hands and demonstrated to me that its base plate can easily be disconnected. After this plate was taken off, the pyramids showed its interior. With a surprise I noticed that it was completely empty inside.

The pyramid was shiny on outside, while inside it was covered with a kind of gold foil. Its surfaces were looking as if covered with a kind of plexiglass. However, after being taken in hand, these surfaces felt as if they were made of glass (both, on the inside, and outside). According to the information of my host, the pyramid which he demonstrated to me produced around 2 kW of AC electricity at 230 Volts, 50 Hz. It worked only after the base plate was put back on its place. The electrical current that it produced was drawn from an ordinary wall socket, exactly the same type as we use in our homes {in New Zealand}.

The socket was mounted in the centre of one of pyramid’s four walls. My host demonstrated to me the operation of this pyramid. He plugged in to its socket an ordinary vacuum cleaner, of a type that today we use in New Zealand. I checked the operation of this vacuum cleaner by switching it on and off, and also by trying use it on the floor of the UFO. It worked perfectly, showing a powerful suction, while it was supplied with energy from this small pyramid, which not only that was moving with it on the floor, but also was empty inside. The operation of this pyramid and its electrical output seemingly was not dependent on the location nor orientation of the pyramid.

My host recommended that our scientists should concentrate on the development of such device, because it would free Earth from all present problems, such as pollution, over-exploitation of resources, etc. Simultaneously our research on this device would lift our science on the higher level of awareness. But, he warned that there will be a lot of opposition against introduction of such devices, as the energy that they produce is for free and cannot be taxed. In turn taxes are foundations of almost every political system which presently controls human societies.

However, in spite of this encouragement, the host has not tell me any clue as to what is the principle employed in the operation of this device, nor in which direction our searches for solution should go.”

The possibility of constructing telekinetic batteries that would provide our civilization with unlimited amount of free energy, is an issue in a significant number of meeting with UFOnauts. Other example of mentioning this topic is contained on page 75 of the book [1D2.4.1] by Timothy Good, “Alien Liaison”, Arrow Books Limited (20 Vauxhall Bridge Road, London SW1V 2SA), 1992, ISBN 0-09-985920-3.

This book quotes an UFOnaut who to a shocked expert in paediatrics and anaesthesia from “Hospital del Ferrocarril del Pacifico in Guadalajara” in Mexico told as follows:

“It is necessary for you to find another energy source, and it is very easy. For that which you call electricity is an ethernal energy ... it is free. It is possible to get tremendous energy if you know how to dissociate electrons, for in this way you can have the free energy you need, without contamination or pollution, and this is what we use to travel space ...”.

Top