In this chapter I'd like to touch on Cosmic Force, the other half of psychic power. Cosmic force contains a lot of variables, it's not just cosmic rays. In the case of the now famous pyramid power it consists of cosmic energy, atmospheric pressure, temperature, phase of the moon and it's gravitational pull, and much more. Exactly how it works still isn't really understood but we do have a hint.

A pyramid shape is the first necessity, although any similar shape will collect a certain amount of power also. (An 'A' frame will act as a very weak pyramid). Not only should the pyramid shape be adhered to, but the most powerful 'generator' is one that is in the exact dimensions of the ancient Cheops pyramid in Egypt. The illustration shows the dimension necessary, should you want to make one for experiments. The size can be altered as much as you like providing you stay within the proper proportions.

Pyramids of cardboard, metal and plastic, have been advertised for several years now, for use in home experiments. And though the material from which they're made isn't too critical, they must all be oriented to magnetic North. Once that's done, some astonishing claims can be made for their powers.


All these are true. In a sense, a pyramid will do the same things our Machine will, but to a much lesser extent and with much more dependency on the ESP ability of the operator.



This page may be used as a template. Cut or trace the large triangle above, onto four pieces of cardboard. Cut out and glue together. 'Kings Chamber' is located about where wording is. A stronger pyramid may be made using two or three layers of cardboard with tinfoil between.


One baseline should be oriented to the north, as shown in sketch. For a larger size to meditate in use a triangle either 10' x 9' 6" (61 high) or 7' x 6 1/2' (aprox. 41/2' high).


For any size in between, use proportions of these dimensions. It's important to be as accurate as possible.

The shape of the pyramid, by collecting and concentrating cosmic forces, is able to accomplish extraordinary things. Meat, or other food put into the Kings chamber of a pyramid, won't decay if left unrefrigerated!


In Europe, there are several companies that package their products in pyramid shaped containers to insure freshness longer. Milk, for instance, will keep up to 8 weeks in such a vessel. A few years ago a patent was granted for a pyramid razor blade sharpener. The darn thing worked too! (Reshaping or I should say, the returning to original form^of metal products that have undergone wear of course takes a little longer than the other processes).


Plants will grow much more rapidly and vigorously inside a pyramid and liquids take on a fresher taste and new composition. In Czechoslovakia, scientist Dr. Rober Pavlita took an interest in the pyramid and other ancient forms of cosmic generators, which have reportedly been around since the time of Atlantis. His experiments over the past few years have been startling. He has evidently learned the actual operating principle behind this phenomenon, for he's invented several new shapes for his generators.


He refuses to divulge any of the critical information regarding these devices until 'the patent is issued and he has a market for them, but they're known to be available in over a dozen shapes and sizes from metal 'oranges' to rods. However, through his experiments a few concrete facts have been discovered concerning the pyramid form, and it's potential.


It's been known for example, that water put under a pyramid for a few minutes takes on a much better taste and when used to moisten plants, seems to gain properties that invigorate them abnormally. In his experiments, Dr. Pavlita examined water he had subjected to pyramid power for a few minutes, and found that the spaces within the molecules had enlarged!


Why, isn't known but the actual molecular structure of the water had changed and made it into more of an elixir than ordinary water. You can try this yourself very easily. All that is needed is a cardboard pyramid and a glass of water. Leave the water inside for at least 15 minutes. Drinking it not only brings no ill effects but actually stimulates the drinker, while it's use for any other purpose is equally enhanced.

As I mentioned, the pyramid may be constructed of almost any material, but metal does seem to work the best, primarily because according to ancient Egyptian practice, the form itself acts almost like a lightening rod. You see the famous pyramids of Egypt that started the whole thing, are now known to have been covered on the outside with a polished metal, that has since been removed and can now be found decorating the walls of nearby temples!

According to Garcia Beltran, Egyptologist, the ancient pyramids had more than one function. Not only were they capable of preserving the dehydrated remains of a living organism in a mummified state, they were also, and primarily, used for rain making!


Said Beltran,

"They were covered with a very smooth white metal and could be seen glittering from hundreds of miles away. For this reason they were called The Lights." (A similar shimmering crystal covered pyramid was discovered in Ireland and is now being renovated by the Government).

Beltran went on to say,

"The metal should have been silver but an alloy was used instead because silver was so scarce in Egypt. Some of the metal is now found on the walls of Mosques, notably those of the Cairo Mosque which have a bright silvery sheen, Egyptian archaeologists know that the metal came from the pillage of the pyramids!'.

He also commented on the actual age of the structures by saying,

"The pyramids are much older than they are generally said to be. Ten thousand years ago they overlooked a verdant green region of skillfully cultivated and irrigated land that produced abundant crops".

According to the Arab historian Abu Zeyd el Balkhy the inscriptions engraved on the pyramids were translated into Arabic, and gave the time of construction as when Lyra was in the sign of Cancer.


That would place construction 73,000 years ago!


Today, nothing remains but ruins and desert because the pyramids have all been either destroyed or mutilated.

The pyramids used to make rain? Not that far fetched. Within the past decade, ultrasonic sounds have been used here in the States to condense fog and make it fall in the form of rain! And in Saint-Nazaire France there stands an aerial fountain invented by Andre Pasquet. This fountain is made of smooth metal which condenses the water vapor in the air.


With it, he can achieve an output of 700 gallons of water a day! Both of these devices could be said to be distant recollections of secret Egyptian and pre-colonbian science because according to historian Garcilaso de la Vega, the ancient Incas knew how to "make water out of air"!

No matter what the other functions of the pyramids, the main item of interest to us at this time is their cosmic intensification abilities. The famed psychic and seer Nostradamus revealed , at one time, the secret of his mental trips into the future for his predictions. Essentially it consisted of the use of water, flame and a "brass pyramid" to induce a trance state!

The ancients of Tibet, that revered place that has become the Mecca of psychic development, also apparently, were aware of the powers inherent in a pyramid form. Initiates were trained in psychic development through the use of a 'magic mirror' whose operation was described like this:

"Every temple has a dark room, the NORTH wall of which is completely covered with a sheet of mixed metal, chiefly copper, very highly polished, and with a surface capable of reflecting things as distinctly as a mirror.


The disciple sits in an insulated chair, a three legged stool placed in a thick, flat bottomed glass vessel, the Lama operator does likewise and the two form a triangle with the mirrored wall. A magnet with the north pole up is suspended over the disciples head, without touching it. The operator, having started the action going, leaves him alone gazing at the wall, and after the third time he is no longer required."

This account was published in the Mahatma Letters in London, in 1926. One of the important requirements of pyramid use is to align the base on a true magnetic north axis. Also the mention of a magnet above the head is important. This practice is gaining acceptance again as being conducive to ESP.

Magnetism is something most of us take for granted and, perhaps even consider so mundane as to be 'kid stuff. This force is so powerful, however, that it's used to twist, cut and form huge chunks of cold steel. In Industry this is called Magnaforming.


Consider. If magnetism can do this to cold steel weighing tons, what is it's effect on frail human tissue? A New York gynecologist and cell expert, Dr. Kenneth MacLean, has been healing everything from stiff muscles to crippling arthritis with a powerful electromagnetic field! And Professor Robert Uffen of the University of Western Ontario has gone even farther.


He's convinced that "magnetism is the key to Life's origin on Earth".


And when Dr. Robert Becker of State University in New York applied this theory to individuals in tests, he discovered the human biomagnetic field. He mapped out this field in great detail.

"Celestial force fields," he said, "can and do exert an influence upon human beings, and are responsible for behavioral changes"!

Even in medicine there is a rapidly growing awareness that the human body, like all matter, is a mass of electrical energy 'pressed' into what we consider solid matter.


As he put it,

"It sounds highly exotic to think of all solid matter as concentrations of electromagnetic waves, but the fact is that everything is part of the electromagnetic spectrum".

It's also well accepted that a magnetic field around a body will increase and enhance the psychic field. In fact, small magnetic jewelry is all the rage right now, in the belief that the field they produce will affect the wearer, I sincerely doubt this as they are extremely small and weak compared to the amount of magnetism necessary to aid psychic achievement. However, a huge magnet isn't necessary either.


One about the size of an orange will do nicely, at least according to Dr. Cristjo Cristofv, father of the Cristofv Effect, used to detect nuclear explosions anywhere on earth. According to Dr. Cristofv fatigue we experience while in planes, cars, buses and buildings is caused by interference with the earths magnetic field. It seems the metal surrounding us works like a Farraday cage to ground out the forces of electrical energy the human body needs.

Dr. Cristofv, who has been a consultant for the Armed Forces and several large corporations, went on to say,

"The earth's magnetic field is positively polarized and measures about 200 volts/meter".

Using this information he has invented a device that consists of a metal can inside of which an electronic device is connected to a battery. It's suspended from the ceiling and will, according to the doctor, provide an 800 volts/meter field.

"Tests of pilots and truck drivers" he said, "Have shown greater alertness and less tiredness. And the metal that surrounds us isn't the only offender" he went on, "plastics have an inherent high negative charge, (as high as 50,000 volt/ meters) which slows performance even more! So plastic seat covers, drapes, spreads etc.. can all cause trouble".

He exposed cats to a field of just that intensity and in just a few weeks their sex drive evaporated, they ate less and they became frightened of mice!

The old fashioned late show concept of a psychic sitting with a metal electrode strapped to his head may not be as far fetched as most people have believed. The nervous system of all living things is now known to work by means of electronics.


Tiny electronic impulses operate the brain and move muscles. Yet, these impulses are so tiny and delicate they can only be traced when they're in groups. Now, if these newly discovered charges are so delicate, it follows that they are easily affected by an electro magnetic field, even one that may be emitted by extra terrestrial means... from out in space.


This isn't so weird sounding if you realize that we live in an environment that literally hums with forces. The stars emit radiation that runs the full electromagnetic spectrum, low frequency radio waves, ultraviolet, past visible light, which is, after all, only higher frequency radiation, up to x-rays and the cosmic range.
You must realize that within our own solar system the sun and it's planets maintain a complicated balance of interrelated magnetic fields.


Gravity itself is now believed to be a form of electromagnetism, and all these forces are shooting through and bouncing off of you, every second since the day you were born. There's ample evidence that planetary forces affect us continually.


Speaking at M.I.T. in 1961, Dr. Robert Becker said, he had discovered an electromagnetic field within the human body.


He stated

"This human electromagnetic field fluctuates with variations in the earth's magnetic field! At present," he continued, "we can only suspect a general relationship between man and the electromagnetic phenomenon that exists in the galaxies".

The fact that the brain is an electrochemical device also has a lot to do with magnetic effects. Both the United States and Russia have experimented with implanting tiny radio receivers in portions of damaged human brains, in order to enable them to take over the function of the damaged brain cells. Further, during the early sixties, Dr. Leonard J. Ravitz, a very prominent neuropsychiatric, did some studies based on the electrodynamic theory of life.


He concluded that,

"all living things have bio magnetic fields. The electrical rythm in humans coincides with Lunar phases of the moon and the distant movements of the stars and planets".

According to him the galactic components are affected by the very same electrodynamic forces we are.

Under the weight of all the evidence provided so far I think it's safe to sum it up this way. We are influenced continuously by electro, geo and bio magnetic forces that are an integral part of both the human being and the material world he inhabits.


Huge magnetic storms on the sun , known as sun-spots have a very definite effect on the weather, particularly in the upper ionosphere, Bioclimatologists have proven that positive and negative ions in the atmosphere effect the way we think, feel, and behave. That electrical charges in the air, not to mention geomagnetism and electromagnetism, affect all living things... plants, animals and people.

The moon has a tremendous direct effect on atmospheric moisture, plants animals and people, seeing as oxygen itself is in effect magnetic! Solar magnetic fields and sunspots effect our atmosphere not only thermally, but magnetically... cosmic rays are known to effect the DNA and RNA... those nucleic acids fundamental to human life... Humans and animals respond to geomagnetic attraction and fields... ultra violet rays from the sun are very apparent in their effect on the body... and even TV radiation has an adverse effect.


As just a moments thought will show you, all of these forces influencing our bodies, minds and surroundings MUST have some effect, other than those discernable to the eye.

Back to Index





In discussing the pyramid effect we mentioned that it acts as a collector and intensifier of L fields and cosmic forces. While most of these forces or field effects are recognized, if not fully understood, they still remain an unknown when considered as a coalition. Like throwing strange chemicals into a beeker, your never sure exactly what will result.


And some strange results indeed, are coming to light when considering the interaction of some newly discovered phenomenon.

Tachyons, for example. Just one of the kinds of strange energy that might exist beyond the measurable spectrum. Scientists have created a model of this particle that exceeds the speed of light! Until only recently, this was considered an impossibility according to Einstein's general field theory. Scientists have found the reason such a particle can/exist ....it never drops below the speed of light with out disintegrating.


They're now engaged in deep research to prove that tachyons are the principle component of the L field! The immense implications of this can be understood with a few more facts and some extrapolation. The L field is the mold for the material body. It is probably also the actual 'life' that is breathed into that body....possibly what we consider the 'soul1! If scientists succeed in determining the energy components of the L fields... they have also solved the secret of life!

If you except that thought... the mind radiates from and is contained within the L field, than it should be easy to accept that after 'death'...,after the physical body ceases to function, the L field remains... intact..... intermingled with the other L fields that surround every material thing in existence. And because memories are formed and filed in the mind, 'you' in essence, still exist! Now whether you desire to believe this or not, you must admit the possibility.


I, for one know that 'something' exists after 'death' for I have contacted and 'spoken' to those that exist there. For that matter, so have the governments of the United States and the Soviet Union, although they, as usual, choose not to admit it to the general public. However, what is termed in journalistic language as 'usually reliable sources' inform me that both of these governments are conducting experiments in laser research in relation to communication.


Simply put, laser is amplified light..... or if you prefer, highly amplified frequencies of the electromagnetic spectrum in the visible light range. Lasers, as your probably aware of have thus far been used to accomplish some pretty marvelous and astounding things. Delicate brain surgery or slicing thru the worlds hardest metal like butter.... both done easily with lasers. It's also used as a means of long range communication, and it's this that we're interested in right now. So, to make it easier to understand perhaps we should dwell for a moment on the mechanics of normal radio communication first. (For this is also the basic method of our psionic apparatus).

The radio station transmitter generates a frequency of great power that radiates from it's antenna much like a light house beacon. It's not audible on your home receiver however. This is just the 'carrier' wave. What they do is impress upon (modulate) this beam a message carrying pulse of a different frequency that is 'carried' along on the wave. (Hence, the term 'carrier wave").


Sort of like dots and dashes with a flashlight. When your set at home picks up the signal, it sifts out the carrier wave frequency and only lets the message portion through... that's what you hear. Simple, right?


Well, so is laser communication, for it's basically the same thing.





A bright strobe light flashes to excite the electrons in the ruby. As they gain speed they are releases from the ruby and strike the mirrors on each end of the tube.


Added stimulation and the bouncing back and forth give them more momentum, until they are strong enough to penetrate the lightly mirrored end of the tube and become a focused ray.

Illustration of Electromagnetic Spectrum showing differing lengths of energy


The major difference is in the much, much higher and intense frequency. Among it's other virtues, it will go places ordinary radio waves won't and get there with more intensity, so you might say it goes farther too.

Earlier, I mentioned that pure thought... the source of the entire electromagnetic spectrum, existed in the ultra, ultra high frequency range. The L field 'inhabitants' exist somewhere in that neighborhood also. Now, if the Source 'thought' or the L field 'thought', or both, exist within a band of frequencies that can be attained with lasers, then we should be able to communicate with, or at least eavesdrop on, the 'hereafter', right ? Okay, then make a note of this.


The laser communication experiments have been extended into much higher frequency ranges in an effort to reach UFO's! (Publicly, they don't exist, but there's sure one heck of an effort being made to contact them)! The startling thing is that both Russia and the U.S., have heard voices! That is, not one distinct voice in deliberate conversation with them, but rather the sound you would get when listening to a crowd... or perhaps I should say, eavesdropping!


This information has been kept under wraps for quite some time... partly due to the fact that no one seems to be sure WHOM they're hearing! Some think it's crosstalk between UFOs, but a good many accredited scientists working on the program are convinced that they're overhearing the - 'spirit world'!


Those are the facts. Here's the part you may or may not believe.


In my own communication with that plane of existence, I've been told a lot of things, one of which was that the voices were from the astral plane... and what's more, were also being monitored by occupants of UFO's, who were, coincidently, trying to use the same means of contact'!

Back to Index





I'm getting away from the subject of the book for a moment, because there may be some readers who now doubt my sanity, and I feel compelled to offer a few more scientific facts in my defense.

Space travel, as marvelous and astounding as it is, has never the less become a rather blasé subject to the general public, and so they may not be aware of some of the startling discoveries and communications of our Apollo astronauts.

Were you aware that in NASA files are thousands of reams of messages that were not released to the public? Only parts of the televised transmissions made it thru to the public before they were switched over to an unmonitored band.


What came thru on those private bands was suppressed until a noted researcher made them public recently. What was discovered before they clamped down the lid, is purely in the tradition of 2001- A Space Oddesy! Here are just a few of the events that took place before the official blackout. Every single astronaut has witnessed strange lights... artificial... both in space and on the lunar surface! An unknown artificial object 'attacked' Apollo 15 astronauts David Scott and James Irwin... flying at very low altitude, it swooped just over their heads! Many artificial dome like structures discovered on the moons surface!


An alien EXTRA LUNAR vehicle not of earth origin was observed by the LEM crew, orbiting just ahead of their mother ship! These are just a few of the many things suppressed by NASA until now. A full account was broken about a year ago, that contains detailed transmissions from those flights... actual accounts by the astronauts of roads... tracks., domes and other structures discovered on our satellites surface!

After a year and a half study of these records, Joseph Blumrich, an engineer at the Marshall Space Flight Center, concluded that the moon has been visited regularly. British space scientist G.V. Foster concurs that there are actually alien structures on the moon.

Really, we shouldn't be surprised if we just take a look back thru the records of astronomers and other trained observers. In 1898 a huge object was spotted in the vicinity of the Aristarchus crater...(one of the sources of the flashing lights seen by our astronauts). In 1912, a black oval shaped object 50 miles in diameter was seen by U.S. astronomer F.B. Harris.


Dr. Percy Wilkens, a distinguished British astronomer, in 1950 observed a huge oval glow in the now famous plain of Aristachus. And in 1958 American, English and Russian observers all reported seeing something streaking toward the moon at better than 25,000 miles an hour... what's more it was giving off signals no one has as yet been able to interpret!

Space scientists around the world, are paying a little more attention to a Scottish astronomer these days... for many of the things he's claimed have now proven to be true. He's Professor Duncan Lunan, and he has evidence in his Glascow University lab, that alien societies have placed a space craft in orbit around the moon!


In his report, which was published in the British Journal of the Interplanetary Society, he announced that the craft is broadcasting signals.


More than that, Dr, Lunan has interpreted them... they read:

"Start here. Our home is Epsilon Bootes, which is a double star. We live on the sixth planet of seven... counting out from the sun, which is the largest of two. Our planet has one moon, our fourth planet has three. Our first and third planets each have one. Our probe is in the orbit of your moon,... this updates the position of Arcturis known in our maps".

Unbelievable? Read on.

Back in the mid sixties, radio astronomers actually did discover a small body orbiting the moon, about 60 degrees behind! They measured it's distance and speed by bouncing radio and radar signals from it's surface. The information they received only forced them to go back much farther in the records to re-check some hitherto unexplained radio messages heard in 1927, 1928, and 1934!


At that time also, three other European researchers transmitted a radio signal toward the moon and received two answering echoes.


The first took only 7 seconds to return, which corresponds with our ionospheric layer, as was expected. The second echo took 15 seconds to return.... much too long than physical law dictated. This led Prof. Lunan to later theorize that perhaps they had been intercepted and retransmitted. Being alien, he thought, other intelligent life wouldn't be sure exactly what kind of message we would understand, and so would probably simply re transmit our own messages back to us in a code! But what kind of code?


In 1968, Prof. Ronald Bracewell of Stanford University finally suggested that such an intelligence would probably use as a code, a map of the constellations we're familiar with.


Prof. Lunan took up the idea and drew a graph on which the periods of delay in the echoes was represented as dots. (Later this was done by NASA computer).

"To our astonishment", said Dr. Lunan, "the dots made up a map of the constellation of Bootes!"

The curious pattern of delayed echoes was a star map!


By this time other researchers got into the act and charted still other delayed echoes... which were found to be six other star maps! And in all of them... every one of the reference lines points to a star called Epsilon Bootes! Now here's the most startling fact, Bootes is 103 million light years away from earth!


Prof. Terrence Nonweiller of the University of Glascow stated,

"What we have here is the interesting possibility that these beings are able to visit any part of the galaxy at thousands or even millions of times the speed of light"! (Remember the Tachyons and neutrinos)?

All of this is no joking matter to the guys at NASA. They all got together at a conference in West Virginia and agreed on a formula that calculated that there are up to 50 million possible civilizations in our galaxy.


And Robert McGowen, of NASA, using the newest astronomical findings calculated that figure at closer to 130 Billion! If you're still one of the non believers, your a very skeptical person indeed.

Back to Index





However you figure it, there seems to be something 'dwelling' within the framework of the ultra high frequency range of the electromagnetic spectrum. If you have an open mind, and especially if you have experienced some degree of psychic ability in the past, this experiment should prove interesting for you. It involves an attempt at communication with the astral plane with the aid of an electromagnetic device that serves as a radio, type beacon or 'homing' device.


It can be built simply, as shown in the illustration. It is an inverted pyramid shape consisting of four metal rods (coat hangers will do) at the corners, wound with doorbell wire and hooked up to a battery. The central rod should not be wound. A small holder built from scrap wood will do for a stand.


When connected you'll find you have a pyramid shaped electromagnet. It should be used, inverted, that is, up side down on a table, or hung right side up overhead.

ELECTROMAGNETIC PYRAMID used as a psychotronic generator

may be used in stand shown ( inverted) or hung right side up overhead.
Size is not important. Weld or solder the hanger-wire together at the base.


It works on the same principal as a regular pyramid shape, in that it collects cosmic energy but it's intensification is greater, due to the artificial magnetic field. This device need not be oriented toward the north. The method of communication amid such an influence is meditation.

Simply relax as much as possible and clear the mind of all outside interference. Doorbells, telephone and other distractions will make tranquil meditation almost impossible. Forget thoughts and problems of the day and leave the mind open.


DO NOT CONCENTRATE! Rather, try to achieve an attitude of 'listening'.

Don't expect to hear voices ....that only happens in the movies. What you will receive will be more in the nature of a thought form.... perhaps a symbol... a hunch... feeling.... intense emotion... or an idea. The important thing to strive for is a listening attitude of.. "I wonder what I'll hear"?


This type of communication uses emotion as it's carrier wave and the response will be more in the nature of an impression or feeling at this stage of your development. If you find yourself with a strong urge to call someone or do something in particular, it's probably a message your receiving. In Astral communication remember this, they can hear you quite easily... you are the one with the hearing problem. And that's mainly due to the fact that most people don't know what to expect. Signals to you are very weak. If your mind is cluttered with other thoughts it creates an 'interferance' that 'jams' the incoming signal and makes it difficult for you to perceive.

There are times when it may be possible for you to do this meditation while a tape or cassette recorder is running.


It will not only make it possible for you to make immediate notes of impressions, but there is the slight possibility of entering into a 'trance' state and anything said then would be recorded for later listening.


Back to Index






There are at least six different psionic machines patented by different people in separate places. All the devices operate on the same principal and oddly enough, most of them have similar circuits. I will use as an example the only American device granted a patent.... the Heironymus machine.

Even back in 1946 Heironymus found that any mineral or compound could be identified if a sample of the specimen were placed in the machine and he concentrated on the substance he wanted to find, while at the same time he turned a dial. The dial is a variable condenser. There are two of them in the circuit, which act as tuners... just like the fine tuning of your TV set.


There are also a series of variable resisters, which must also be adjusted to find the most refined signal. All the dials are tuned while thinking of the substance desired. As the dials are turned and the concentration is being maintained, a small plate is stroked with the fingers of one hand. The proper setting for each dial is determined when the fingers experience a "sticking" sensation on the plate. After adjusting all the dials not only is the presence of the substance sought determined, but also the quantity or amount present. Thus, an ore sample will also determine the approximate worth of the ore.


As Heironymus said,

"It makes no difference who does the tuning. If the operator concentrates on copper the device will detect the presence of copper if there is any".

Everyone who operated the machine got the exact same reading on the dial! Nothing else will cause the 'sticking' sensation except copper... unless it's thought of! Of all the people who built the heironymus machine and tested it I know of no one who failed to get results! The only 'problem' involved was that the operator's sensitivity to the stroked plate varied. Some found it easier to detect the point of greatest drag than others. But, practice will ease even this ability. This isn't unreasonable when you think of it in the light of any other ability.


To be really good at anything you have to practice.


Back to Index





All psionic devices are principally alike.


They are comprised of three or four component parts, the amplifier section being omitted on some designs. The 'witness' being the source object examined, i.e.; photo, lock of hair, ore sample etc., is placed in the collector well or plate of the detector. A tuning device of some kind is then utilized to refine the frequency emanations of the witness.


This signal is sometimes amplified and then fed into the output section where it is utilized to broadcast the signal, or photograph the signal, or in some manner utilize the refined emanation.


These generalities are provided for those who may wish to alter the construction to suit their own desires or for experimentation with their own custom models.

The detector section is comprised of anything which will react to, and convey the initial emanations from the witness. This could be simply two slim metal wires either touching or adjacent to the witness, or two metal plates, or a crystal or photo cell. Remember, the emanation can be handled as you would either an electric current or an optical ray. In the last instance, you may want to use a light prism and lens arrangement.

In the tuner section, any manner of fine tuning may be employed, bearing in mind the dual electrical/optical qualities of the original signal. For example, a standard variable capacitor or rheostat may be used as in radio construction, or a lens focusing arrangement if handled as an optic ray. In this section is also placed some sort of device for determining the correct setting.


This is usually an insulated plate of either plastic or rubber coating, which is stroked with the fingers. It could also be a highly sensitive voltmeter or other electrical device but these may not prove as satisfactory. As a rule, bodily contact with the operator is essential in this regard. Electrodes to the head are sometimes also utilized.

One very successful adaptation uses a pyramid shaped coil of nonmagnetic wire, wound around a wooden or otherwise insulated dowel, in conjunction with a moveable electrode. The electrode touches the coil, and as the coil is rotated, the electrode comes into contact with different parts of the coil, thus 'fine' tuning the signal. In the De La Warr adaptation, this is also used as an amplifier, in that it is enclosed in a hollow cylinder that increases the 'resonance' of the coil. In this regard, a light source is used as the basic carrier wave for the resonance to the output section.... furthering the amplification somewhat.

The output section is the working end of the device, and your intended use of the emanation determines what arrangement you use here. Electrodes to the head could be used for telepathic or astral communication....two metal plates are sometimes used for picture taking, although a moveable lens is also utilized here to focus the emanation. In some designs a prism is used before the lens.


For broadcasting the emanation, as in using the device for affecting plants, people, etc., at a distance, an antenna is used. However a light beam could also be effective for shorter distances. It should be understood that at this point the signal can be fed directly by wires, broadcast as an electrical or optical beam or directed by focusing photographically. You have your choice.


Specific plans for several models are included in the following pages, but if you understand the basics of operation, you can easily adapt your own design to any particular need. Just remember to handle the signal as you would any electrical, optical or audio output.

Any of the machines may be constructed in any suitable container. I built my first one in a cigar box. However, this proves a trifle small if the output section is to be composed of several different components. If you wish a fancier looking machine, metal or fiber general purpose boxes or cabinets may be purchased from any radio supply house. For easier identification in these building plans I have used Radio Shack as my source for parts, but any supply house will do. The boxes just mentioned come in various sizes and range in price from $3 up to $6 or $8 depending upon their size.

For those who may not be familiar with radio parts I've included a photo page showing the most widely used. Simply show it to the salesman if in doubt, he'll know what you want.

The entire cost of constructing a basic psionic device, including a prefabricated metal box from Radio Shack parts ran $18. This price may vary slightly, depending upon the size of amplifier you use and the size box employed etc. But regardless of which diagram you follow, the entire cost shouldn't exceed $30!
I'd like to mention here that if for any reason the machine doesn't function satisfactorily CHECK YOUR COMPONENTS AND WIRES.


Make sure all connections are clean and tight. Broken wires or burned out tubes will be the biggest problem here. If however, your machine still isn't quite up to what you expected, don't shrug it off. Because of the various tuning methods employed, no one design is best for all people. Be sure to try a different design. You can usually use the same parts arranged in a different manner. Remember, this machine has been used successfully by hundreds of people, and it will work for you too, if you have the model best suited to your 'touch'.

In regards to taking photographs with the machine, bear in mind the sensitivity of the film or paper being used. Film is probably best and I would strongly urge the serious user to learn to develop his own. Black and white film can be very easily developed by anyone with a closet or bathroom to work in. A beginners outfit shouldn't cost more than about $10 and it's well worth it.


Your bound to give your negatives more 'custom1 treatment than a mass producer will. The images you receive may be very faint, and a mass produced developing could fail to develop them. A word of caution though. Don't let the photo supplier talk you into any fancy gimmicks....you don't need them.


If you want to get a little fancier, it's up to you, but for shoe-stringers the absolute minimum is listed below.

  • 3 small plastic trays. (These could be soup bowls instead).

  • A red light bulb

  • A small piece of glass (one from a picture frame works okay).

  • A clock or watch with a second hand

  • A measuring cup (stolen from the kitchen).

  • A small pkg. or can of FILM developer

  • A small pkg. or can of fixer

  • A small pkg. or can of shortstop (plain water works just as well).

  • A developing tank (you don't need it but it eliminates a lot of grief).

  • A thermometer (again, steal it from the kitchen).

  • A pkg. of CUT FILM ( you can cut it up into small pieces in a dark place for insertion into an envelope made from construction paper, and inserted in the machine)

  • A small pkg. of developing paper if you want to make prints. (Film can be used here for transparencies instead. You've already got the film).

  • A small booklet on how to develop film for beginners. (Kids do it all the time)!

Basically, you take the exposed film from the camera or holder, while in a dark place, place it into the tray of developer for a few seconds, nut it into the shortstop or water for a few seconds, then immerse it into the fixer and rinse with water. That's it!


Developing prints is exactly the same but you need a different kind of developer... one made for PRINTS. Nothing to it.


And when you do it your self, any faint pictures can be left in the developer longer etc.

A film holder is simply an arrangement of small wood pieces that form a slot into which may be inserted an envelope made from construction paper. Any form of holding this envelope in place will suffice. I used two metal plates that purchased from Radio Shack, on the bottom of which I glued a small strip of wood. These metal pieces would them stand by themselves.


When glued close together in the box, they form an open centered sandwich into which is inserted the film envelope. These metal plates are called copper clad boards. The film envelopes are recommended because they allow you to insert and develop one picture at a time, made from small pieces of 'cut film', which can be purchased in a box from photo shops. Be sure to open and cut this film ONLY under a red light or in total darkness, depending upon the directions on the film.


Make several envelopes to save time later.

Back to Index


It has been determined thru use, that an elaborate "well" system is not necessary for efficient operation of a Black Box. Additionally, the stroker plate need not be a complicated affair. Consequently, the following assembly instructions illustrate an extremely simple procedure for building an Heironymus type psionic Box, although it must be remembered that this is a relatively "simple" version.


Operationally it is just as versatile as any radionic device. Functionally, however, it would need additional "jury rigging" to accomplish some of the more sophisticated experiments.

The following is a list of parts necessary to build this device:

  • 2-variable capacitors- 365pf w/knobs. (This is a radio tuning dial)

  • 1-variable resistor-5K (5000 ohms) linier taper w/knob.

  • 1-small amplifier w/knob 9 or 12 volt d.c

  • 1-On/Off Switch-Toggle type

  • 1-Battery snap for transistor battery

  • 1-Battery holder clip

  • 1-Crocodile clip (from hardware store)

  • 5-notched right angle mounting plates

  • 2-Miller 70-A Loopstick antennas or equivalent bar type

  • 2-pcs. copperclad board aprox. 3 x3 inches

  • 1-TV Bunny Ears type antenna... either screw mounting or free standing

  • 2-Alligator clips... if using the free standing bunny ears

  • 1-piece of wood aprox. 3/4 x 7x10 inches

  • 1-roll of 20ga. or 22 ga. hookup wire

  • 1-6 foot (minimum) length of 18 ga, grounding wire

  • 1-assorted screws (aprox. No. 4) glue and tape as needed.

  • soldering iron, screwdriver, solder, and any other tools preferred.

(All of the parts listed above (except for those marked with*) may be purchased from Herbert Scott & Associates, Box 156, Hancock, Wisconsin, 54943 for $30, simply by ordering the 'Black Box Parts Pkg.1 Shipping is incl. for US customers. Overseas orders, $5 additional-US funds.)

The box can be built into a metal or plastic container such as a school lunch box, or simply mounted on a flat board. For simplicity, we'll illustrate the latter method.

Any well stocked electronic store can provide you with the right angle mounting plates as illustrated. These are simply glued or screwed down to the base board, about 3-4 inches in from the front edge. The five control elements; On/Off switch, 2 variable capacitors, variable resistor and amplifier, are attached to the mounting plate by removing the nut that is already on the shaft of the element, slipping the shaft down into the notch of the mounting plate and re-fastening the nut on the shaft. You will then have five free standing controls as shown on the photo.

Next, cut one of the copper plates in half so that you have a piece aprox. 1˝ x 3 inches and drill a screw hole in each end. Screw this down loosely in front of the controls and to the right side of the board. (If you're left handed, move it to the left side.) This will be your stroker plate. Cover this plate with Scotch tape, varnish or clear fingernail polish, but be sure the screws are not prevented from being tightened down later.

Take the other copper clad plate, drill one screw hole in each of two opposing corners, and screw down loosely to rear left side of base board.

Next, using tape or glue, fasten the two RF transformers (loop-stick antennas) to the base, side by side about 2 inches or so apart, in the aprox. center of the board.

If you're using bunny ears that are free standing (have their own base) you need only provide two alligator clips to the ends of the antenna input wires. Clip off the prongs already on the wires and after stripping the ends, wrap the bared wire around the screws on the alligator clips. However, if you're using the screw down type shown, now is the time to drill two screw holes in the back edge of the boards (spaced to fit the antenna baseband fasten the antenna down loosely.

The battery clamp can now be screwed (glued or taped) down to the base near the right rear edge.

If the output section of your machine calls for a lens arrangement, a very simple one can be built, even though it may look complicated.


For the lens a simple magnifying glass will do. However, in order to adjust the focal length, you must build a sliding holder for the lens. Diagram C4 shows a simple arrangement. The wires shown on each end of the slide can be eliminated for hand operation or else wound around a used spool from thread, to make a moveable knob. By turning the spool knob, the wire or string winds onto one side of the spool, while unwinding from the other, and thus moves the slide.

If an adjustable lens is used, as from a camera or movie camera, the only thing necessary is to affix the lens so it doesn't move when it's adjusted.

Illustrations C5 and C6 suggest just one type of arrangement that might be employed for a lens operated device. Of course this arrangement would work just as well for any type of output, be it head electrodes, photo plates, antenna etc. It is the layout of the Heironymus machine using a lens arrangement.

You're now ready to begin wiring your Black Box.


The pictorial wiring diagram may look frightening at first glance, but it's really quite simple if you just follow and connect one element at a time. If you get easily confused, use a pen or colored marker to 'cross off1 each wire on the diagram as you insert and solder them. It will then be very easy later, to see if you've forgotten any.


We suggest you begin the wiring with the all important grounding wire that connects all five of the control elements.


It is easiest to strip a long enough length of wire to reach all five controls at one time, and simply solder the wire to each mounting plate where it touches. No matter how you do it, all 5 of the mounting plates MUST be connected together and attached to the 6 foot grounding wire. Using the screw supplied, attach the other end of this wire to a crocodile clip. In operation, this clip will be used to attach the Box to a radiator, water pipe, auto bumper, etc.

Next, connect the red wire on the battery snap to one prong of the On/Off switch, (you may have to splice on a short piece of wire to reach the switch). Simply bare the wires ends, twist these bared ends together and apply solder. You may wrap a piece of tape around the splice to insure that there will be no accidental 'short' in the wire). Next, run a red wire from the other prong of the switch to the red wire of the amplifier. The black wire of the battery snap should be spliced to the black wire of the amplifier.

Now proceed to the rest of the wiring connections as shown on the diagram, in any order that you choose. When attaching the wires to the well plate, stroker plate and antenna, simply wrap the bared ends around the screws and tighten down securely.


When wiring is done, snap a battery in and your ready to operate.

Your assembly should look like this


The plans just outlined will provide you with a basic and simple Heironymus type Psionic instrument able to perform most experiments. To do exotic work, such as psychic photography, deep space audio reception, health experiments, especially with color irradiation, etc, you would need to adapt these plans for those functions, or purchase such devices ready made.

In actual practice to date, there are at least a dozen different types of psionic devices in use around the world, each designed to suit a particular function. To expect one device to accomplish ALL the experiments outlined is impossible. In Europe, where radionic/psionic medical diagnosis and treatment are legal, there are at least 8-10 different and distinct machines made.

I'm pointing this out because so many of my readers have written me complaining that their 'box1 won't do something they want it too. Which simply means they were in too much of a hurry to read all instructions carefully.

Because psionics is NOT A PARLOR GAME to be taken lightly, and something which should be learned thoroughly, I include only simple plans....ones suited for the beginner. After you gain proficiency is time enough to expand into the exotic realms. If this philosophy is too much work or too time consuming for you, than you are not going to be well suited to be a radionic/psionic operator and shouldn't even be dabbling in the field! .

However, if you are seriously interested in learning about this amazing field, then be honest enough with yourself to read all the instructions carefully and perform the various experiments in their proper order so that you can learn and grow in a well grounded way.


The impatient have no place in psionics for even if their slipshod experiment DO succeed, they can be more dangerous than beneficial!

Back to Index